Setting Up The Zigbee Dongle - Dell Edge 5000 Series Installation And Operation Manual

Setting up the ZigBee dongle

CAUTION: Do not connect the ZigBee dongle if the Edge Gateway is installed inside the enclosure.
NOTE: Do not connect the ZigBee dongle to the internal USB port of the IO expansion module.
1. Shut down your Edge Gateway.
2. Connect the ZigBee dongle to any external USB port on your Edge Gateway.
or
Connect the ZigBee dongle to any external USB port on the IO module.
NOTE: Do not connect the ZigBee dongle to the internal USB port of the IO expansion module.
3. Turn on the Edge Gateway and complete the setup.
NOTE: For ZigBee development information, see www.silabs.com/.
96
9