Restoring Wind River Linux - Dell Edge 5000 Series Installation And Operation Manual

Power On the Edge Gateway to boot into Wind River Linux OS. The Wind River Linux does not have a graphical user interface (GUI).
Log into the OS on the terminal with the following default credentials.
• root@WR-IDP-xxxx login: root (where xxxx is the version of the Wind River Linux)
• Password: root

Restoring Wind River Linux

CAUTION: Following these steps deletes all the data on your system.
You can restore Wind River Linux on the Edge Gateway using the recovery OS image on the boot partition which resets the run-time
image back to the factory image if you encounter any of the following situations:
• You are unable to start Wind River Linux
• The Wind River Linux operating system is damaged.
Connect a keyboard, mouse, and monitor to the Edge Gateway, or connect to the Edge Gateway through a KVM session, Dell Wyse
Cloud Client Manager (CCM), or Dell Command | Monitor (DCM).
1. Boot to the OS menu
2. Choose the Wind River Intelligent Device Platform (Restore Factory Image) option and press Enter.
This restores the run-time image back to factory OS image state.
41