Important Information/Safety Regulation; General Safety Precautions - Danfoss DHP-iQ Installation Manual

Installation Guide
2

Important information/Safety regulation

2.1

General safety precautions

Carefully follow the precautions listed as below because they are essential to guarantee the safety of Danfoss product. Store the manual
in a safe place in order to be able to use it as reference after installation. Remember to hand it over to the new owner if the heat pump
unit is sold or transferred. To prevent serious damage on the system and injuries to users, precautions and other notices shall be ob-
served.
Risk of personal injury! Children are not permitted to play with the
Danger
product.
Always disconnect a power supply of heat pump before servicing it or
Danger
accessing components inside the unit. (Have in mind that electrical
current is stored for a while in the condensator after you disconnect
the power supply)
Verify that installation and testing operations must be performed by
Warning
qualified personnel.
This manual explains how to install the air/water heat pump. The use
Caution
of other types of units with different control systems may damage the
units and invalidate the warranty. The manufacturer shall not be re-
sponsible for damages arising from the use of non compliant units.
The manufacturer shall not be responsible for damage originating
Warning
from unauthorized changes or the improper connection of electric
and hydraulic lines. Failure to comply with these instructions or to
comply with the requirements set forth in the "Operating limits" table,
included in the manual, shall immediately invalidate the warranty.
Do not use the units if you see some damages on the units, hear loud
Warning
noise, or the smell of burning.
If the unit produces smoke, is very noisy or if any of the cables are hot
Warning
or damaged, always use the protection switch to turn off the unit and
contact the heat pump supplier.
Danfoss Heating Solutions
DHP-iQ
VIJSS102
7