Important Information/Safety Regulation; General Safety Precautions - Danfoss DHP-AQ Series Service Instructions Manual

Service Instructions
2

Important information/Safety regulation

2.1

General safety precautions

Warning
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
6
DHP-AQ
Risk of personal injury! Children are not permitted to play with the product.
The heat pump must be installed by authorised installation engineers and the installation must follow the
applicable local rules and regulations as well as these installation instructions.
This product is not intended for persons (including children) with reduced physical, sensory or psychological
capacity, or who do not have knowledge or experience, unless supervised or they have received instructions
on how the apparatus functions from a safety qualified person.
The heat pump must be located in a frost-free environment!
The heat pump must be placed in an area with a floor drain.
The heat pump must be located on a stable base. The floor must be able to support the gross weight of the
heat pump with filled hot water tank (see Technical data).
To prevent leaks, ensure that there are no stresses in the connecting pipes!
It is important that the heating system is bled after installation.
Bleed valves must be installed where necessary.
The hot water tank must be equipped with an approved safety valve.
Heating systems with closed expansion tanks must also be supplied with approved pressure gauges and safe-
ty valves.
VMGFJ202 Danfoss Heating Solutions