Transporting, Unpacking And Setting-Up; Transporting The Heat Pump; Unpacking; Unpack The Heat Pump - Danfoss DHP-iQ Installation Manual

Installation Guide
4

Transporting, unpacking and setting-up

4.1

Transporting the heat pump

Caution
Caution
Caution
4.2

Unpacking

4.2.1

Unpack the heat pump

Warning
Caution
N
20
DHP-iQ
During transportation and lifting of the entire heat pump, the front
panel must always be in place as it locks the other panels in position.
The heat pump must always be transported and stored upright in a
dry environment. Secure the heat pump so that it cannot tip over dur-
ing transportation.
The heat pump must not be tilted more than 30° in any direction.
If the heat pump is tilted more, it may become seriously damaged as
the oil in the compressor can run out in the pressure pipe and there-
fore prevent normal function.
Wear protective gloves to unpack, move, install, and service the unit to
avoid your hands being injured by the edge of the parts.
Make sure to safely dispose of packing materials. Packing materials,
such as nails and other metal or wooden pallets may cause children
get injured.
All the materials used for the manufacture and packaging of the air to
water heat pump are recyclable.
VIJSS102 Danfoss Heating Solutions