Seagull Models SEAX139 Assembly Manual page 6

SHOESTRING 25e EP
10) Apply 1-2 drops of thin CA in each
of the holes to harden the surrounding
wood for the aileroon cover screws.
11) Set the aileron hatch in place and use
screwdriver to install it with four metal
screws.
6
12) Use a drill bit to drill the two holes
completely through the aileron for the ai-
leron control horn mounting screws. The
holes have already been started and are
easily found on the bottom of the aileron.
13) Attach the control horn to the aileron
using two 2x12m metal screws and a con-
trol horn backplate. Use a screwdriver to
tighten the screws.
Instruction Manual.
2x12mm