Display In Measuring Mode With 2 Or 3 Measured Values - KROHNE OPTISONIC 3400 Handbook

OPERATION
6
Key Measuring mode
> Switch from measuring
mode to menu mode;
press key for 2.5 s,
"Quick Start" menu is
then displayed
Reset display; "Quick
^
Access" function
↓ or ↑
Switch between display
pages: measured
value 1 + 2, trend page
and status page
Esc (> + ↑)
-

6.1.1 Display in measuring mode with 2 or 3 measured values

Figure 6-2: Example for display in measuring mode with 2 or 3 measured values
1 Indicates a possible status message in the status list
2 Tag number (is only indicated if this number was entered previously by the operator)
3 1st measured variable in large representation
4 Bargraph indication
5 Depiction with 3 measured values
56
Menu mode
Access to displayed
menu, then 1st
submenu is displayed
Return to measuring
mode but prompt
whether the data should
be saved
Select menu
-
www.krohne.com
Submenu or function
mode
Access to displayed
submenu or function
Press 1 to 3 times,
return to menu mode,
data saved
Select submenu or
function
Return to menu mode
without acceptance of
data
05/2016 - 4002037705 - HB OPTISONIC 3400 R05 en
OPTISONIC 3400
Parameter and data
mode
For numerical values,
move cursor
(highlighted in blue) one
position to the right
Return to submenu or
function, data saved
Use cursor highlighted
in blue to change
number, unit, property
and to move the decimal
point
Return to submenu or
function without
acceptance of data