Table of Contents
Advertisement
ALTOSONIC V12
Key
Measuring mode
>
Switch from measuring
mode to menu mode;
press key for 2.5 s
Reset of display
^
or
Switch between the five
screens: M1, M2, G1, S0,
Version and modbus
settings.
Esc (> + ↑)
-
Table 6-1: Description of key functionality
6.1.1 Display in measuring mode with 1 or 3 measured values
Figure 6-2: Example for display in measuring mode with 1 or 3 measured values
1 Indicates a possible status message in the status list
2 Lock, indicating that programming is not possible
3 Actual screen
4 First measured variable in large depiction
5 Description with 3 measured values
01/2019 - 4002643505 - MA ALTOSONIC V12 R05 en
Menu mode
Access to displayed
menu, then 1st
submenu is displayed
Return to measuring
mode but prompt
whether the data should
be saved
Select menu
-
www.krohne.com
Submenu or function
mode
Access to displayed
submenu or function
Press 1 to 3 times,
return to menu mode,
data saved
Select submenu or
function
Return to menu mode
without acceptance of
data
OPERATION
6
Parameter and data
mode
For numerical values,
move cursor
(highlighted in blue) one
position to the right
Return to submenu or
function, data saved
Use cursor highlighted
in blue to change
number, unit, setting
and to move the decimal
point
Return to submenu or
function without
acceptance of data
37
Advertisement
Table of Contents
