Table of Contents
Advertisement
OPTISENS OAM 1050
1.1 Turbidity measuring system with innovative cuvette technology
The compact turbidity measuring system OPTISENS OAM 1050
method to scan liquid samples in glass cuvettes. This means that the measurement optics are
not directly exposed to the sample and thus require less maintenance.
Because the measuring cuvette can be simply and quickly replaced by standard cuvettes of
known turbidity, a recalibration is possible within a few minutes. Another feature is the
automatic ultrasonic cleaning function which removes deposits from the cuvette wall and and
lengthens service intervals in this way.
1 Flow through unit with cuvette
2 Display and operating unit
3 Sample outlet
4 Sample inlet with pressure regulator
Highlights
• 90° scattered light method according to ISO 7027 / US EPA 18
• Measuring range: 0...100 NTU/FNU (0...1000 NTU/FNU optional)
• Rapid response time due to small measurement volume
• Simple calibration with reusable liquid calibration standards
• Automatic ultrasonic cleaning to prevent mineral deposits
• Compact, space-saving design
• Integrated shut-off valve for maintenance work
• Optimal back pressure setting to avoid gas bubbles through integrated outlet valve
• Active current output / 2 alarm relays
• RS 485 / Modbus interface
07/2011 - TD OPTISENS OAM 1050 R02 en
OPTISENS OAM 1050 uses the 90° scattered light
OPTISENS OAM 1050
OPTISENS OAM 1050
www.krohne.com
PRODUCT FEATURES
1
3
Advertisement
Table of Contents
