Note:
- While viewing R
ISO
the time in which the result was entered into memory. This applies to all R
- Press ESC to immediately display basic component of the result.
- For R
there is no option of scrolling through the components of the result.
CONT
5.3 Deleting memory data
You can delete the entire memory or its individual banks.
5.3.1 Deleting bank data
results, the field of timer / memory displays alternately bank and cell numbers and
OPERATING MANUAL MIC-2501 version 1.04
Use
and
buttons to set the desired num-
ber of the bank.
<<
>>
Use
or
MEM (LED
Press ENTER button.
and I
measurements.
ISO
L
to browse the memory:
is on).
Set the bank number to
be deleted acc. to sec-
tion 4.2.
Set the cell number as
"--" (before "01")...
... and the cell number
will change into "--",
then symbol
will be
displayed to indicate
the readiness for delet-
ing.
21