Table of Contents
Advertisement
To change the cell number or bank number:
After selecting the desired bank and cell, press
ENTER button, to save the result in the memory. Re-
cording is indicated by a triple beep.
Press ESC to return to the measurement screen with-
out saving.
If you try to store data in an occupied memory cell, the following warn-
ing message will appear:
OPERATING MANUAL MIC-2501 version 1.04
Use
and
buttons to preview the results
stored in the selected cell.
When the cell number is flashing, use
buttons to set the desired number of the cell.
Press SET/SEL button – bank number is flash-
ing.
Use
and
buttons to set the desired num-
ber of the bank.
The cell is partially
occupied by a differ-
ent type of result to
be entered - symbols
of the saved values
are displayed.
The cell is fully occu-
pied, symbols (mne-
monics) of stored val-
ues are displayed.
and
19
Advertisement
Table of Contents
