Turning The Meter On And Activating Screen Backlight; Meter Configuration - Sonel MIC-2501 Operating Manual

2

Turning the meter ON and activating screen backlight.

Emer-
gency si-
tuations.
6
3

Meter Configuration

Use buttons
time or to inactivate this function (horizon-
tal lines – Auto-OFF function is inactive).
Auto-OFF function is used to turn-off inac-
tive meter after a preselected time.
Use
screen with audio message settings:
bEEP.
OPERATING MANUAL MIC-2501 version 1.04
Turn on the meter with
Short press button to turn the
screen backlight on; press the button
again to turn the backlight off.
Switch on the meter by pressing and
and holding button for approx. 2
sec.
Pressing button for approx. 7 sec-
onds will turn off the meter in case of
emergency.
Turn on the meter by pressing and
keeping SETUP button pressed.
and
and buttons to enter the
button.
to set Auto-OFF