Low-Voltage Measurement Of Resistance; Measurement Of Resistance Of Protective Conductors And Equipotential Bonding With 200 Ma Current - Sonel MIC-2501 Operating Manual

4.2 Low-voltage measurement of resistance

4.2.1 Measurement of resistance of protective conductors and equipotential
bonding with 200 mA current
<<
Use
(LED
ment mode.
Connect the meter to the tested object.
Trigger the measurement by pressing the START button.
Press START push-button in order to start next measure-
ment without disconnecting test leads from the object.
OPERATING MANUAL MIC-2501 version 1.04
>>
or button to start the measurement of R
is on). The meter is in the voltage measure-
The meter is ready for meas-
urement.
Read out the result.
CONT
15