Voltage Measurement - Sonel MIC-2501 Operating Manual

4.3 Voltage measurement

Additional information displayed by the meter
>750V
blinking in red,
two-tone acoustic
signal is generated
, LED is
Measuring range is exceeded. Voltage is higher than
acceptable. Immediately disconnect the test leads.
When AC voltage is detected, the device will display
~
symbol "
the device will display symbol "
-
or "nil" for positive polarity.
OPERATING MANUAL MIC-2501 version 1.04
<< >>
Use or
urement of
meter is in the voltage measurement
mode.
Connect the meter to a
voltage source.
~"
("wave") and when DC voltage is detected,
button to start the meas-
(LED is on). The
Measurement is per-
formed in a continu-
ous manner.
-
" for negative polarity
17