Viewing Memory Data - Sonel MIC-2501 Operating Manual

Note:
- After the measurement, its result is shown on the display until:

the measurement function is changed,

Auto-OFF function is activated,

the meter detects interference voltage> 50V,

one of the following operations is performed:
o
ESC button is pressed to exit to the voltmeter,
o
next measurement is performed,
o
an entry into the memory is introduced.
- After exiting to the voltmeter by pressing ESC or after saving the results to the memory, the last result
may be recalled by pressing ENTER.
- Complete set of results (main result and supplementary results) for a given measuring function and
preset measurement settings are stored in the memory.

5.2 Viewing memory data

20
or
To change the cell number or bank number:
Press SET/SEL button – bank number is flashing.
OPERATING MANUAL MIC-2501 version 1.04
Press ENTER, to overwrite the re-
sult or ESC, to cancel and select
other cell or bank.
<< >>
Use or to browse the memory: MEM
(LED is on).
Use and buttons to preview the results
stored in the selected cell.
When the cell number is flashing, use
buttons to set the desired number of the
cell.
and