Table of Contents
Advertisement
Use SET/SEL to go to display leakage cur-
rent I
OPERATING MANUAL MIC-2501 version 1.04
of pre-set t1, t2 or t3 values (measure-
ment without time limit), press again
START or ESC button.
View of the screen during
measurement.
means that the measure-
ment was started with
ENTER button or by press-
ing and holding START but-
ton for approx. 5 sec.
.
L
After the measurement is
completed or stopped,
read the result. The re-
sults of all completed
measurements will be dis-
played (even when the
measurement was inter-
rupted/stopped e.g. after
60 seconds). When the
meter switched into
standby mode, the meas-
urement result may be re-
called by pressing
ENTER.
11
Advertisement
Table of Contents
