Listing The Files On The Avaya G350 Media Gateway - Avaya G350 Administration

configuration on the G350. For more information about running configuration and startup configuration,
see Configuration using GUI applications
To transfer a configuration file between the G350 and a server on the network, use one of the following
commands:
•
Use the
configuration file becomes the startup configuration on the G350.
•
Use the
The configuration file becomes the startup configuration on the G350.
•
Use the
an FTP server.
•
Use the
a TFTP server.
•
Use the
FTP server.
•
Use the
TFTP server.
Listing the files on the Avaya G350 Media
Gateway
Use the dir command to list all G350 files. When you list the files, you can see the version numbers of the
software components. The
Administration of the Avaya G350 Media Gateway
June 2004
on page 22.
command to restore a configuration file from an FTP server. The
copy ftp startup-config
command to restore a configuration file from a TFTP server.
copy tftp startup-config
command to back up the running configuration on the G350 to
copy running-config ftp
command to back up the running configuration on the G350 to
copy running-config tftp
command to back up the startup configuration on the G350 to an
copy startup-config ftp
command to back up the startup configuration on the G350 to a
copy startup-config tftp
command also shows the booter file, which cannot be changed.
dir
Basic device configuration
Version management
49