Enabling And Disabling Telnet Access - Avaya G350 Administration

Enabling and disabling telnet access

You can enable and disable the G350's ability to establish incoming and outgoing telnet connections,
using the following commands. You can only use these commands when accessing the G350 via a direct
connection to the console port. See
•
Use the
form of this command to disable the G350's ability to establish an incoming telnet connection.
no
•
Use the
Use the
connection.
Administration of the Avaya G350 Media Gateway
June 2004
Accessing CLI with a console device
ip telnet command to enable the G350 to establish an incoming telnet connection. Use the
command to enable the G350 to establish an outgoing telnet connection.
ip telnet client
form of this command to disable the G350's ability to establish an outgoing telnet
no
Accessing the Avaya G350 Media Gateway
Special security features
on page 27.
37