Environment - Cembre ROLLY 2000 Operation And Maintenance Manual

Thermal transfer printer
Table of Contents

Advertisement

1
Introduction
Risk of crushing when closing the cover. Keep fingers outside when moving the device cover.
Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or service technicians.
Unauthorised interference with electronic modules or their software can cause malfunctions.
Other unauthorised work on or modifications to the device can also endanger operational safety.
Always have service work done in a qualified workshop, where the personnel have the technical knowledge and
tools required to do the necessary work.
There are various warning stickers on the device. They draw your attention to dangers.
Warning stickers must therefore not be removed, as then you and other people cannot be aware of dangers and
may be injured.
The maximum sound pressure level is less than 70 dB(A).
Danger!
Danger to life and limb from power supply.
 Do not open the device casing.
1.4

Environment

Obsolete devices contain valuable recyclable materials that should be sent for appropriate processing.
The modular construction of the printer enables it to be easily disassembled into its component parts.
 Send the parts for recycling.
Following information applies in member states of the European Union:
 USER INFORMATION in accordance with "Directives 2002/95/EC and 2002/96/EC regarding the reduction
of hazardous substances in electrical and electronic equipment, including the disposal of waste".
The 'Not in the bin' symbol above when shown on equipment or packaging means that the equipment must, at the
end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed guidelines
for its separate collection.
Appropriate waste separation, collection, environmentally compatible treatment and disposal is
intended to reduce harmful environmental effects and promote the reuse and recycling of materials contained in
the equipment.
Unlawful disposal of such equipment will be subject to the application of administrative sanctions provided by
current legislation.
The electronic circuit board of the device is equipped with a lithium battery.
 Take old batteries to appropriate collection centres.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents