Symbol Displays; Printer States - Cembre ROLLY 2000 Operation And Maintenance Manual

Thermal transfer printer
Table of Contents

Advertisement

10
3
Control panel
3.2

Symbol displays

The symbols shown in the following table may appear in the status line of the display, depending on the printer
configuration. They enable the current printer status to be seen quickly.
Symbol
Table 2
Symbol displays
3.3

Printer States

State
Ready
Printing label
Pause
Recoverable error
Irrecoverable error
Critical error
Power Save Mode
Table 3
Printer states
Description
Clock
Date
Date/time digital
Ribbon supply
Wi-Fi signal strength
Display
Ready
and configured symbol displays,
such as time
Printing label
and the number of the printed label
in the print job.
Pause and the symbol
and the type of error
and the number of labels still to be
printed.
and the type of error and the
number of labels still to be printed.
and the type of error
and the key lighting is switched off
Symbol
Description
Ethernet link status
Temperature of the
printhead
PPP funds
Debug window for abc
programs
Control of the lower
display line is handed
over to an abc
program
Description
The printer is in the ready state and can receive data.
and date
The printer is currently processing an active print job.
Data can be transmitted for a new print job.
The new print job will start when the previous one
has finished.
The printing process has been interrupted by the
operator.
An error has occurred that can be rectified by the
operator without interrupting the print job.
The print job can be continued after the error has
been rectified.
An error has occurred that cannot be rectified without
interrupting the print job.
An error occurs during the system test.
 Switch the printer off and then on again at the
 Press cancel key.
Call Cembre if the fault occurs persistently.
If the printer is not used for a lengthy period, it
automatically switches to power save mode.
 To exit power save mode: Press any key on the
Symbol
Description
User memory in the clock
circuit
Used memory
Input buffer
Access to memory card
Printer is receiving data
power switch or
navigator pad.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents