Table of Contents
Advertisement
5
Cleaning
5.4
Cleaning the label sensor
Attention!
!
Label sensor can be damaged!
Do not use sharp or hard objects or solvents to clean the label sensor.
The label sensor can become contaminated. This can adversely affect label detection.
Fig. 17 Cleaning the label sensor
1. Turn lever (1) counterclockwise to lift the printhead.
2. Remove media and ribbon from the printer.
3. Press the latch (3) and slowly pull label sensor outward via the tab (4). Ensure that the label sensor cable is not
stretched during this operation.
4. Clean label sensor and sensor units (2) with brush or cotton swab soaked in pure alcohol.
5. Push label sensor back via tab (3) and set it ( 4.1.4 on page 14).
6. Reload media and ribbon.
1
2
3
4
19
Hide quick links:
Advertisement
Table of Contents
