Loading Material; Loading Labels From Roll ( Ttl; Removing And Installing The Core Adapters - Cembre ROLLY 2000 Operation And Maintenance Manual

12 4

Loading material

4.1 Loading labels from roll
4.1.1

Removing and installing the core adapters

Core adapters are mounted for better guidance of the label roll on the roll retainer when using label rolls with a core
diameter ≥ 75 mm.
 Remove core adapters for smaller label rolls as follows.
Fig. 7 Core adapters and margin stop
Removing the core adapters
1. Open cover.
2. Turn ring (5) at the margin stop (4) counterclockwise, so that the arrow (7) points to the symbol
release the margin stop.
3. Remove the margin stop (4) from the roll retainer (2).
4. Turn the rings at the adapters (1,3) counterclockwise and thus release the adapters.
5. Remove the adapters (1,3) from the roll retainer (2).
6. Re-mount the margin stop (4) onto the roll retainer (2), turn ring (5) clockwise, so that the arrow (7) points to the
symbol
Installing the core adapters
1. Open cover.
2. Turn ring (5) at the margin stop (4) counterclockwise, so that the arrow (7) points to the symbol
release the margin stop.
3. Remove the margin stop (4) from the roll retainer (2).
4. Align the guide lugs (6) in the core adapters (1,3) with the grooves in the roll retainer (2) an push the adapters
onto the roll retainer.
5. Slide first core adapter (1) to the chassis until it stops and fix the adapter by turning the ring clockwise.
6. Place second core adapter (3) matching to the roll width and fix it by turning the ring clockwise.
7. Re-mount the margin stop (4) onto the roll retainer (2), turn ring (5) clockwise, so that the arrow (7) points to the
symbol
, and thus fix the margin stop (4) on the roll retainer.
, and thus fix the margin stop (4) on the roll retainer.
1
2
3
Fig. 8 Core adapter unfixed (left)
and fixed (right)
4
5
Fig. 9 Margin stop unfixed (left)
and fixed (right)
2
6
7
5
2
, and thus
, and thus