Introduction; Instructions; Intended Use; Safety Instructions - Cembre ROLLY 2000 Operation And Maintenance Manual

4 1

Introduction

1.1

Instructions

Important information and instructions in this documentation are designated as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger to your health or life.
Warning!
!
Indicates a hazardous situation that could lead to injuries or material damage.
Attention!
!
Draws attention to possible dangers, material damage or loss of quality.
Notice!
i
Gives you tips. They make a working sequence easier or draw attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction

Reference to section, position, illustration number or document.

Option (accessories, peripheral equipment, special fittings).

Time
Information in the display.
1.2

Intended use

• The device is manufactured in accordance with current technological status and recognised safety rules.
However, danger to the life and limb of the user or third parties and/or damage to the device and other tangible
assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the operating manual.
• The device is intended exclusively for printing suitable materials that have been approved by the manufacturer.
Any other use or use going beyond this shall be regarded as improper use. The manufacturer/supplier shall not be
liable for damage resulting from unauthorised use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the operating manual, including the manufacturer's
maintenance recommendations and specifications.
Notice!
i
The complete documentation is included in the CD, and can also be found the Internet.
1.3

Safety instructions

• The device is configured for voltages of 100 to 240 V AC. It only has to be plugged into an earthed socket.
• Only connect the device to other devices which have a protective low voltage.
• Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
• The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• If the device is operated with the cover open, ensure that people's clothing, hair, jewelry etc. do not come into
contact with the exposed rotating parts.
• The device or parts of it can become hot while printing. Do not touch during operation, and allow to cool down
before changing material and before disassembly.