Mitsubishi Electric AE-200A Instruction Book page 48

8-4-5. Object
From [BACnet Settings], click the [Object] tab to display the [Object Settings] screen. Sets objects to use with the
AE-200 (control items), as well as details of COV notifications and event notifications for each object. Only those
items set on this screen (Use:
8-4-5-1. Selecting objects to be used
Select objects to use with the AE-200 (control items) by selecting the check box in the [Use] field, (Use:
Not use: ). Check the check box to change the [Object Name] field from gray to white. Additionally, objects
that are not used are displayed with [Object Name] in gray, and setting of COV notifications and event
notifications is not possible. Note that setting of "DEV_xxxxxx (Device)" and "CLS_xxxxxx (Notification Class)"
objects is not required.
WT07921X01
) can be used as control items on the AE-200. Below are the initial settings.
48
)/