Mitsubishi Electric AE-200A Instruction Book page 41

(2) Changing communications device
Changes device settings. Select the device to change and click [Modify], or double-click the [Address/Port
No.] to change to display the [Device Address] pop-up window.
When changing or deleting the device IP address, ensure that you check the notification destination IP
address set in 8-4-3 "COV Notification" and 8-4-4 "Event Notification". If settings are inconsistent, BACnet
connection mode may not switch to "Online".
(3) Deleting communications device
Deletes registered devices. Select the communications device to delete, and click [Delete] to delete settings.
Additionally, devices with device numbers set to "Broadcast" are used as an introductory sequence, therefore
cannot be deleted.
WT07921X01
41
®