8-4-3. COV Notification
From [BACnet Settings], click the [COV Notification] tab to display the [COV Notification Settings] screen.
This assigns device numbers registered on the [Network and Device] screen to the COV notification number. By
using the COV notification number set here to set COV notifications for each control item in 8-4-5 "Object", send
COV notifications such as changes in status of control items and start-stop status in accordance with each COV
notification number. Below are the initial settings.
8-4-3-1. COV No.
Click the [Add] or [Modify] buttons under [COV No.] to display the following window. Input the COV No., and
select the [OK] button. A maximum of 5 COV numbers can be registered. Note that the range 1 to 10 can be
registered as COV No.
WT07921X01
42