Mode Setting - Mitsubishi Electric AE-200A Instruction Book

7-2-4. Mode Setting

Sets the AE-200 BACnet
to [Online], the AE-200 will automatically restart.
Online: The AE-200 is communicating with the central monitoring device (BACnet
Offline: The AE-200 is disconnected from the central monitoring device (BACnet
When performing [Send Settings] to the AE-200, set to [Offline].
* Important notes when selecting [Acquire Settings] or [Send Settings]
(1) Select [Send Settings] after switching the AE-200 BACnet
(2) If [Send Settings] is selected when [Online], then the BACnet
abort [Send Settings].
(3) To close [Send Settings] and return to the normal AE-200 operational status, switch to [Online].
(4) After switching to [Online], the AE-200 will restart.
(5) After restart, check that the AE-200 BACnet
Completion of start-up can be confirmed by either the AE-200's LCD operating, or by being able to
connect using a web browser.
(6) If the AE-200 is [Offline], then BACnet
device to monitor the status of devices connected to BACnet
an alarm, therefore when switching the AE-200 BACnet
system administrator.
WT07921X01
®
connection mode (Online/Offline). When switching the connection mode from [Offline]
®
communications are stopped. When using the central monitoring
®
connection mode to [Offline].
®
Setting Tool will display an error, and
®
connection mode is [Online].
®
, the central monitoring device may output
®
connection mode to [Offline], first contact the
26
®
)
®
)