Mitsubishi Electric AE-200A Instruction Book page 45

8-4-4. Event Notification
From [BACnet Settings], click the [Event Notification] tab to display the [Event Notification Settings] screen.
As in 8-4-3 "COV Notification", this assigns device numbers registered on the [Network and Device] screen to the
notification destination class ID. By using the notification class set here to set event notifications for each control
item in 8-4-5 "Object", send event notifications such as changes in status of control items and abnormality alarms
in accordance with each notification class ID.
Below are the initial settings.
8-4-4-1. Notification Class
Click the [Add] or [Modify] buttons under [Notification Class] to display the following window. Set the
notification class ID and priority order for event notifications. A maximum of 5 notification class IDs can be set.
No. Item
1 Notification Class ID
2 Priority
WT07921X01
Set the instance number of notification class object.
(Setting range: 0 to 4194302)
Sets the priority order of event notifications for generated events
(settings range: 0 to 255, lower figures indicate higher priority).
Set to "255" unless otherwise specified.
45
Description Default value
(Blank)
255