Bacnet ® Settings - Mitsubishi Electric AE-200A Instruction Book

®
8-4. BACnet Settings
[BACnet Settings] has [BACnet], [Network and Device], [COV Notification], [Event Notification], [Object], [Other],
and [ForcedOff Reset] settings screens.
The following explains basic terminology used in BACnet
®
<BACnet terminology>
Terminology
Network No.
Device No.
Object
COV notification
Event notification
I-Am
8-4-1. BACnet
Sets AE-200 device number, BACnet
tab to display the [BACnet Settings] screen. Initial settings are as follows.
8-4-1-1. AE-200/AE-50/EW-50 BACnet Settings
Sets items related to the AE-200 device number and BACnet
displayed in light gray.)
WT07921X01
Number that identifies the BACnet
this settings tool, on systems not using the BACnet
Number that identifies the BACnet
device basis.
Information regarding input/output and other internal status of the BACnet
Abbreviation of Change Of Value. Function that notifies other BACnet
event of a change to an object PresentValue or StatusFlags.
Notifications of detected alarms and events based upon algorithms defined in each object.
®
BACnet services to communicate device information such as device No., APDU maximum value,
segmentation support information, and vendor ID to destination devices.
®
functions, and other settings. From [BACnet Settings], click the [BACnet]
®
.
Description
® ®
router to which BACnet
®
router, this is "Local".
®
device (equipment). IP addresses are assigned on a per-
®
functions. (Items that cannot be changed are
35
device (equipment) is connected. In
®
device (equipment).
®
devices of changes in the