Mitsubishi Electric AE-200A Instruction Book page 51

8-4-5-2. Notification Setting
Select the [Use] check box (
control items (objects).
(1) Setting COV Notification and Event notification
Double-click the control items (objects) to set, and the [Notification Setting] pop-up window as below will be
displayed. Display of pop-up windows for objects that have not been selected using check boxes in the [Use]
field is not possible. Depending on object names, setting of event notifications and "COV Increment" may not
be possible. (See table "Support for COV notifications and event notifications")
As shown below, initial status for both COV notification and event notification is disabled (Example: BI_01xx20
communications status).
No. Item
Use COV
1 Use COV
2 COV No.
3 COV Increment
Use Event
4 Use Event
5 Notification Class ID
Event-Enable
6 To-Offnormal
7 To-Fault
8 To-Normal
Notify Type
9 Alarm
10 Event
WT07921X01
), and set notifications (COV Notification and Event Notification) for enabled
Check the checkbox to use COV notification.
Set the COV No. (destination).
Set the "value change increment" for COV notifications responding
to value changes. Only settings for temperature measurement
value and temperature settings value notifications are possible.
(Setting range: 0.000001 to 99.99999)
Leave "1.0" as it is unless otherwise specified.
(For systems that support 0.5ºC, setting to "0.5" or "1.0" is
recommended.)
Check the checkbox to use Event Notification.
Set the Notification Class (destination).
Check the checkbox for event notifications resulting from Normal
or Fault → Offnormal.
Check the checkbox for event notifications resulting from Normal
or Offnormal → Fault.
Check the checkbox for event notifications resulting from Offnormal
or Fault → Normal. *3
Check the checkbox when the Event Notification Type is "Alarm".
Check the checkbox when the Event Notification Type is "Event".
51
Description
*1
*2
Default
Unchecked
1
1.0
Unchecked
1
Unchecked
Unchecked
Unchecked
Checked
Unchecked