D-Link DFL-260E Reference Manual page 96

traceroute -stop
Stop trace.
Options
-6
-count=<1...10>
-maxhops=<1...255>
-nodelay
-noresolve
-pbr=<table>
-size=<Integer>
-srcip=<ip address>
-starthop=<1...255>
-stop
-timeout=<1...60000>
<String>
Chapter 2: Command Reference
Force IPv6 if target is a FQDN.
Number of queries to send for each hop. (Default:
3)
Maximum number of hosts to traverse in search of
target. (Default: 30)
Send queries as fast as possible (may look like
Denial of Service attack).
Disable reverse DNS lookup of hosts.
Route using PBR Table.
Packet data size. (Default: 32)
Use this source IP.
Initial TTL value. (Default: 1)
Stop trace in progress.
How many milliseconds to wait for each reply.
(Default: 1000)
IP address or FQDN of host to trace.
96