D-Link DFL-260E Reference Manual page 230

AllowedRoutes
MPPEAllowStateful
SNMPIndex
MemberOfRoutingTable
RoutingTable
ProxyARPAllInterfaces
ProxyARPInterfaces
Comments
Chapter 3: Configuration Reference
Servers (NBNS) to assign IP addresses to NetBIOS
names. (Optional)
Restricts networks
automatically be added. (Default: all-nets)
Allow usage of Stateful MPPE (less secure, use only
for compatibility). (Default: No)
Interface index assigned by the system when
persistent interface indexes are enabled. (Default:
0)
All or Specific. (Default: All)
Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
Specifies the interfaces on which the firewall
should publish routes via Proxy ARP. (Optional)
Text describing the current object. (Optional)
230
for which routes may