Ippolicy - D-Link DFL-260E Reference Manual

3.60. IPPolicy

Description
An IP Policy specifies what action to perform on network traffic that matches the specified filter
criteria.
Properties
Index
Name
Action
Reject
SourceAddressTranslation
NATSourceAddressAction
SATSourceAddressAction
SourceNewIP
SourceBaseIP
SourceNATPool
SourcePortAction
SourceNewSinglePort
SourceBasePort
DestAddressTranslation
DestAddressAction
DestNewIP
DestBaseIP
DestPortAction
DestNewSinglePort
DestBasePort
AntiVirus
AV_Mode
Chapter 3: Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the policy.
Allow or Deny. (Default: Allow)
Drop the packet and respond with an ICMP error or
TCP reset. (Default: No)
Action to take on source address. (Default: Auto)
Specify method to determine which sender
address to use. (Default: OutgoingInterfaceIP)
Specify method to determine which sender
address to use.
Specifies which sender address will be used.
Specifies base address for sender address.
Specifies NAT Pool to fetch sender address to be
used.
Specify method to determine which port action to
use. (Default: None)
Translate to this port. (Optional)
Transpose using this port as base. (Optional)
Action to take on destination address. (Default:
None)
Specify method to determine which destination
address to use.
Specifies which destination address will be used.
Specifies base address for destination address.
Specify method to determine which port action to
use. (Default: None)
Translate to this port. (Optional)
Transpose using this port as base. (Optional)
Anti-Virus scanning. (Default: No)
Anti-Virus mode. (Default: UsePolicy)
200