Route6 - D-Link DFL-260E Reference Manual

ReachabilityRequired
Samples
MaxPollFails
MaxAverageLatency
RequestURL
ExpectedResponse
Comments

3.110.2. Route6

Description
A route defines what interface and gateway to use in order to reach a specified network.
Properties
Name
Network
Interface
Gateway
LocalIP
Metric
ProxyNDAllInterfaces
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
Specifies if this host is required to be reachable for
monitoring to be successful. (Default: No)
Specifies the number of attempts to use for
statistical calculations. (Default: 10)
Specifies the maximum number of failed attempts
until host is considered to be unreachable.
(Default: 2)
Specifies the max average latency for the sample
attempts. (Default: 800)
Specifies the HTTP URL to monitor.
Expected HTTP response.
Text describing the current object. (Optional)
Specifies a symbolic name for the object.
(Optional)
Specifies the network address for this route.
Specifies which interface packets destined for this
route shall be sent through.
Specifies the IPv6 address of the next router hop
used to reach the destination network. If the
network is directly connected to the firewall
interface, no gateway address is specified.
(Optional)
The IPv6 address
automatically published on the corresponding
interface. This address will also be used as the
sender address in ARP queries. If no address is
specified, the firewall's interface IPv6 address will
be used. (Optional)
Specifies the metric for this route. (Default: 100)
Always select all interfaces, including new ones, for
287
specified here will be