D-Link DFL-260E Reference Manual page 286

MonitorGateway
MonitorGatewayARPInterval
EnableHostMonitoring
Reachability
GracePeriod
ReachabilityCount
Metric
ProxyARPAllInterfaces
ProxyARPInterfaces
Comments
3.110.1.1. MonitoredHost
Description
Specify a host and a monitoring method.
Properties
Method
IPAddress
Port
SourceIPSelection
SourceIP
PollingInterval
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
Mark the route as down if the next hop does not
answer on ARP lookups during a specified time.
(Default: No)
Specifies the ARP lookup interval in milliseconds.
(Default: 1000)
Enables the Host
(Default: No)
Specifies the number of hosts that are required to
be reachable to consider the route to be active.
(Default: ALL)
Specifies the time to wait after a reconfiguration
until the monitoring begins. (Default: 5)
Minimum number of reachable hosts to consider
the route to be active.
Specifies the metric for this route. (Default: 100)
Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
Specifies the interfaces on which the firewall
should publish routes via Proxy ARP. (Optional)
Text describing the current object. (Optional)
Monitoring method. (Default: ICMP)
Specifies the IP address of the host to monitor.
Specifies the TCP port to monitor.
Which IP should be used as a source IP. (Default:
Automatic)
The IP address to be used as source IP.
Delay in milliseconds between each monitor
attempt. (Default: 10000)
286
Monitoring functionality.