Servicetcpudp - D-Link DFL-260E Reference Manual

3.116. ServiceTCPUDP

Description
A TCP/UDP Service is a definition of an TCP or UDP protocol with specific parameters.
Properties
Name
DestinationPorts
Type
SourcePorts
SYNRelay
ForwardICMPErrors
EnableIPv4PathMTUDiscovery
Protocol
MaxSessionsProtocol
ALG
MaxSessions
Comments
Chapter 3: Configuration Reference
Specifies a symbolic name for the service.
(Identifier)
Specifies the destination port or the port ranges
applicable to this service.
Specifies whether this service uses the TCP or UDP
protocol or both. (Default: TCP)
Specifies the source port or the port ranges
applicable to this service. (Default: 0-65535)
Enable SYN flood protection (SYN Relay). (Default:
No)
Allow ICMP errors for active connections to be
forwarded through the system. (Default: No)
Path MTU Discovery allows communicating
endpoints to negotiate optimal packet sizes. This
prevents fragmentation by network equipment
between the endpoints. Path MTU Discovery relies
on ICMP message forwarding so ICMP forwarding
must also be enabled. (Default: No)
Protocol settings are only used by IP Policies.
(Optional)
Specifies how many concurrent sessions that are
permitted using this Protocol. (Default: 200)
An Application Layer Gateway (ALG), capable of
managing advanced protocols, can be specified for
this service. (Optional)
Specifies how many concurrent sessions that are
permitted using this service. (Default: 200)
Text describing the current object. (Optional)
296