Userauthrule - D-Link DFL-260E Reference Manual

3.127. UserAuthRule

Description
The User Authentication Ruleset specifies from where users are allowed to authenticate to the
system, and how.
Properties
Index
Name
Agent
ChallengeExpire
AuthSource
Interface
OriginatorIP
TerminatorIP
RadiusServers
PrimaryRetryInterval
ResendingSTART
LDAPServers
RadiusMethod
LocalUserDB
LoginType
MACAuthSecret
MACAllowRouter
Chapter 3: Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule.
ARPCache, HTTP, HTTPS, XAuth, PPP or EAP.
(Default: HTTP)
How long, in seconds, before RADIUS challenge
expires. (Default: 160)
Disallow, LDAP, RADIUS or Local.
The interface on which the connection was
received.
The network object that the incoming IP address
must be a part of.
Specifies the destination IP configured on the
PPTP/L2TP server configuration. Only used when
agent is PPP or SSL. With SSL, this is the IP address
of the listening interface.
Specifies the authentication servers that will be
used to authenticate users matching this rule.
How many seconds to wait before trying to use the
primary server again if it has failed. (Default: 0)
If the RADIUS servers fail to respond system will
retry to send a START message every Interim
seconds. (Default: No)
Specifies the authentication servers that will be
used to authenticate users matching this rule.
Specifies the authentication method used for
encrypting the user password. (Default: PAP)
Specifies the local user database that will be used
to authenticate users matching this rule.
HTML form or Basic authentication. (Default:
HTMLForm)
Password used to authenticate MAC user, if empty
the MAC address will be sent as password.
(Optional)
Allow cliente connected through an Router.
(Default: No)
310