D-Link DFL-260E Reference Manual page 258

Description
An aggregate is used to replace any number of smaller networks belonging to the local (intra)
area with one contiguous network which may then be advertised or hidden.
Properties
Network
Advertise
Comments
3.90.1.4. OSPFVLink
Description
An area that does not have a direct connection to the backbone must have at least one area
border router with a virtual link to a backbone router, or to another router with a link to the
backbone.
Properties
Name
RouterID
UseDefaultAuth
AuthType
AuthPassphrase
AuthMD5ID
AuthMD5Key
Comments
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
The aggregate network used to combine several
small routes.
Advertise the aggregate. (Default: Yes)
Text describing the current object. (Optional)
Specifies a symbolic name for the virtual link.
(Identifier)
The ID of the router on the other side of the virtual
link.
Use the authentication configuration specified in
the OSPF process. (Default: Yes)
Specifies the authentication type for the OSPF
protocol exchanges. (Default: None)
Specifies the passphrase used for authentication.
(Optional)
Specifies the MD5 key ID used for MD5 digest
authentication.
A 128-bit key used to produce the MD5 digest.
(Optional)
Text describing the current object. (Optional)
258