D-Link DFL-260E Reference Manual page 210

SLBHTTPExpectedResponse
SLBDistribution
SLBWindowTime
SourceInterface
DestinationInterface
SourceNetwork
DestinationNetwork
SourceGeoFilter
DestinationGeoFilter
Service
Schedule
SourceAddressTranslation
NATSourceAddressAction
SATSourceAddressAction
SourceNewIP
SourceBaseIP
SourceNATPool
SourcePortAction
SourceNewSinglePort
SourceBasePort
LogEnabled
LogSeverity
Chapter 3: Configuration Reference
Expected HTTP response. (Optional)
Specifies the algorithm used for the load
distribution tasks. (Default: RoundRobin)
Specifies the window time used for counting the
number of seconds back in time to summarize the
number of new connections for connection-rate
algorithm. (Default: 10)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the destination interface to be compared
to the received packet.
Specifies the sender span of IP addresses to be
compared to the received packet.
Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Specifies the country filter to be compared against
the sender Geolocation of the received packet.
(Optional)
Specifies the country filter to be compared against
the destination Geolocation of the received packet.
(Optional)
Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
Action to take on source address. (Default: Auto)
Specify method to determine which sender
address to use. (Default: OutgoingInterfaceIP)
Specify method to determine which sender
address to use.
Specifies which sender address will be used.
Specifies base address for sender address.
Specifies NAT Pool to fetch sender address to be
used.
Specify method to determine which port action to
use. (Default: None)
Translate to this port. (Optional)
Transpose using this port as base. (Optional)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent
210