Datetime - D-Link DFL-260E Reference Manual

3.18. DateTime

Description
Set the date, time and time zone information for this system.
Properties
TimeZone
Location
DSTEnabled
DSTOffset
DSTMode
DSTStartMonth
DSTStartDay
DSTEndMonth
DSTEndDay
TimeSynchronization
TimeSyncServerType
TimeSyncServer1
TimeSyncServer2
TimeSyncServer3
TimeSyncInterval
TimeSyncMaxAdjust
TimeSyncGroupIntervalSize
Comments
Chapter 3: Configuration Reference
Specifies the time zone. (Default: GMT)
Specifies the location to use its time zone.
(Optional)
Enable daylight saving time. (Default: Yes)
Daylight saving time offset in minutes. (Default: 60)
Select DST Mode. (Default: Manual)
What month daylight saving time starts. (Default:
March)
What day of month daylight saving time starts.
(Default: 1)
What month daylight saving time ends. (Default:
October)
What day of month daylight saving time ends.
(Default: 1)
Enable time synchronization. (Default: Disable)
Type of server for time synchronization, UDPTime
or SNTP (Simple Network Time Protocol). (Default:
SNTP)
DNS hostname or IP Address of Timeserver 1.
DNS hostname or IP Address of Timeserver 2.
(Optional)
DNS hostname or IP Address of Timeserver 3.
(Optional)
Seconds between each resynchronization. (Default:
86400)
Maximum time drift in seconds that a server is
allowed to adjust. (Default: 600)
Interval according to which server responses will
be grouped. (Default: 10)
Text describing the current object. (Optional)
142