Arpndsettings - D-Link DFL-260E Reference Manual

3.9. ARPNDSettings

Description
Advanced ARP/Neighbor Discovery-table settings.
Properties
ARPMatchEnetSender
ARPQueryNoSenderIP
ARPSenderIP
UnsolicitedARPReplies
ARPRequests
ARPChanges
StaticARPChanges
ARPExpire
ARPExpireUnknown
ARPMulticast
ARPBroadcast
ARPCacheSize
ARPHashSize
ARPHashSizeVLAN
ARPIPCollision
ARPLogResolveSuccess
Chapter 3: Configuration Reference
The Ethernet Sender address matching the
hardware address in the ARP data. (Default:
DropLog)
If the IP source address of an ARP query (NOT
response!) is "0.0.0.0". (Default: DropLog)
The IP Source address in ARP packets. (Default:
Validate)
Unsolicited ARP replies. (Default: DropLog)
Specifies whether or not the ARP requests should
automatically be added to the ARP table. (Default:
Drop)
ARP packets that would cause an entry to be
changed. (Default: AcceptLog)
ARP packets that would cause static entries to be
changed. (Default: DropLog)
Lifetime of an ARP entry in seconds. (Default: 900)
Lifetime of an "unknown" ARP entry in seconds.
(Default: 3)
ARP packets claiming to be multicast addresses;
may need to be enabled for some load
balancers/redundancy
DropLog)
ARP packets claiming to be broadcast addresses;
should never need to be enabled. (Default:
DropLog)
Number of ARP entries in cache, total. (Default:
4096)
Number of ARP hash buckets per physical
interface. (Default: 512)
Number of ARP hash buckets per VLAN interface.
(Default: 64)
Behavior when receiving an ARP request with a
sender IP colliding with the one used on the
receive interface. (Default: Drop)
Specifies whether or not to log when ARP Resolve
succeeds. (Default: No)
131
solutions. (Default: