Vlan - D-Link DFL-260E Reference Manual

3.128. VLAN

Description
Use a VLAN to define a virtual interface compatible with the IEEE 802.1Q / 802.1ad Virtual LAN
standard.
Properties
Name
VLANID
BaseInterface
Type
IP
Network
DefaultGateway
Broadcast
DHCPEnabled
DHCPHostName
DHCPDNS1
DHCPDNS2
EnableIPv6
IPv6IP
IPv6Network
IPv6DefaultGateway
RouterDiscovery
AutoIPv6IP
DHCPv6Enabled
Chapter 3: Configuration Reference
Specifies a symbolic name for the interface.
(Identifier)
The virtual LAN ID used for this virtual LAN
interface. Two virtual LANs cannot have the same
VLAN ID and type if they are based on the same
interface. (Default: 0)
Interface where this VLAN is being tunneled.
VLAN type. (Default: 0x8100)
The IP address of the virtual LAN interface.
The network address of the virtual LAN interface.
The default gateway of the virtual LAN interface.
(Optional)
The broadcast address of the virtual LAN interface.
(Optional)
Enable DHCP client on this interface. (Default: No)
Optional DHCP Host Name. Leave blank to use
default name. (Optional)
IP of the primary DNS server. (Optional)
IP of the secondary DNS server. (Optional)
Enable processing of IPv6 traffic on this interface.
(Default: No)
The IPv6 address of the virtual LAN interface.
The IPv6 network of the virtual LAN interface.
The default gateway of the virtual LAN interface.
(Optional)
Uses Router information (ND RA) from local
network to auto-configure Network and Default
Gateway addresses. (Default: No)
Automatically configures IP Address using Network
Address and EUI-64. (Default: No)
Enable DHCPv6 client on this interface. (Default:
No)
313