Flight Test; Calibrating The Compass - dji Spark User Manual

Hide thumbs Also See for Spark:
Table of Contents

Advertisement

To perform the CSC midair in case of an emergency, hold for 1.5 seconds to stop the motors mid-
flight. Stopping the motors mid-flight will cause the aircraft to crash.

Flight Test

Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the battery level indicators facing towards you.
2. Turn on the Intelligent Flight Battery.
3. Launch the DJI GO 4 app and enter the camera page.
4. Wait until the Aircraft Indicators blink green. This means the Home Point is recorded and it is now safe
to fly. Use Auto Takeoff.
5. Use Auto Landing to land the aircraft.
6. Turn off the Intelligent Flight Battery.
When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe
mode.
A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly
during flight.
Watch our video tutorials for more flight information.
Video Suggestions and Tips
1. Go through the full pre-flight checklist before each flight.
2. Select the desired gimbal operation mode in the DJI GO 4 app.
3. Only shoot video when flying in P Mode.
4. Always fly in good weather and avoid flying in rain or heavy wind.
5. Choose the camera settings that suit your needs. Settings include photo format and exposure
compensation.
6. Perform flight tests to establish flight routes and preview scenes.
7. Push the control sticks gently to keep the aircraft's movement smooth and stable.

Calibrating the Compass

Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe
the following rules when calibrating your compass:
DO NOT calibrate your compass where there is a chance of strong magnetic interference, such
as near magnetite, parking structures, or steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.
The DJI GO 4 app will notify you if the compass is affected by strong interference after calibration is
complete. Follow the prompts to resolve the compass issue.
Spark User Manual
©
2017 DJI All Rights Reserved.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spark

Table of Contents