dji Spark User Manual page 42

Spark User Manual
5. Camera Parameters
Displays camera settings parameters and capacity of the Micro SD card. Enable camera parameters
display in the Camera Settings.
6. GPS Signal Strength
: Shows the current GPS signal strength. White bars indicate adequate GPS strength.
7. 3D Sensing System Status
: Tap this icon to enable or disable features provided by the 3D Sensing System.
8. Wi-Fi Settings
: Tap to enter the Wi-Fi settings menu.
2.4G
9. Battery Level
: This icon shows the current battery level.
61
%
Tap to view the battery information menu, set the various battery warning thresholds, and view the
battery warning history.
10. General Settings
: Tap to enter the general settings menu for setting metrics, enabling live streaming, displaying
flight routes and so on.
11. Gimbal Pitch Tracking
: Adjust the gimbal's tilt by rotating your mobile device after tapping this icon.
12. Gimbal Slider
13. Photo/Video Toggle
: Tap to switch between photo and video recording modes.
14. Shoot / Record Button
: Tap to start shooting photos or recording video.
/
15. Camera Settings
: Tap to enter the camera settings menu.
Tap to set ISO, shutter, and auto exposure values of the camera.
Tap to select photo modes. Spark supports Single Shot, Burst Shot, Interval Shot, Pano, and
ShallowFocus.
Tap to enter the general camera setting menu.
42
©
2017 DJI All Rights Reserved.
1080P/30
: Displays the pitch of the gimbal.