dji Spark User Manual page 51

1. With the aircraft powered off, connect the aircraft to a computer via the Micro USB port using a Micro
USB cable.
2. Power on the aircraft.
3. Launch DJI Assistant 2 and login with your DJI account.
4. Select Spark and click on Firmware Updates on the left panel.
5. Select the firmware version that you wish to update.
6. Wait for the firmware to be downloaded and the firmware update will start automatically.
7. Reboot the aircraft after the firmware update is complete.
Ensure the aircraft is connected to your computer before powering on.
The firmware update will take around 15 minutes. It is normal that the gimbal goes limp, aircraft
status indicators blink abnormally, and the aircraft reboots. Please wait patiently until the update
is complete.
Ensure the computer has access to the Internet.
Ensure the Intelligent Flight Battery has at least 50% power and the remote controller has at
least 30% power.
Do not disconnect the aircraft from the computer during an update.
Spark User Manual
©
2017 DJI All Rights Reserved.
51