Flight Recorder; Attaching And Detaching The Propellers - dji Spark User Manual

Spark User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. This includes flight telemetry,
aircraft status information, and other parameters. To access this data, connect the aircraft to the PC
through the Micro USB port.

Attaching and Detaching the Propellers

Only use DJI approved propellers with your Spark. White ringed and unmarked propellers indicate where
they should be attached and in which direction whey should spin.
Propellers
Figure
Attach On Motors with white marks
Legend
Attaching the Propellers
Attach the propellers with the white rings to the mounting base with white marks. Press each propeller
down onto the mounting plate and rotate in the lock direction until it is secured. Attach unmarked
propellers to the mounting bases without marks. Unfold all the propeller blades.
Marked
Detaching the Propellers
Press the propellers down into the motor mount and rotate them in the unlock direction.
Propeller blades are sharp; please handle with care.
Only use DJI approved propellers. Do not mix propeller types.
Stay clear of spinning motors. Do not touch the propellers when they are spinning.
Ensure to check that the propellers and motors are installed firmly and correctly before each
flight.
Ensure that all propellers are in good condition before each flight. Do not use aged, chipped,
or broken propellers.
To avoid injury, stand clear of and do not touch propellers or motors when they are spinning.
Please use original DJI propellers for a better and safer flight experience.
26
©
2017 DJI All Rights Reserved.
White Ring
Lock : Turn the propellers in the indicated direction to mount and tighten.
Unmarked
Unmarked
Motors without white marks