dji Spark User Manual page 21

Exiting Coordinate Mode
Use the following methods to exit Coordinate Mode:
1. Tap the icon on the screen.
2. Pull back the pitch stick on the remote controller for three seconds or more.
3. Press the Flight Pause button on the remote controller.
4. Drag the blue circle left and right.
Direction Mode
Keep flying in the direction you tap on the screen.
Using Direction Mode
Ensure the Intelligent Flight Battery is fully charged and the aircraft is in P Mode. Follow the steps below to
use Direction Mode:
1. Take off and ensure the aircraft is flying at least 3 ft (1 m) above the ground.
2. Launch DJI GO 4 and tap
3. Tap once on the target and wait for the "GO" icon to appear. Tap the "GO" icon to confirm the
selection and the aircraft will fly in that direction automatically.
. Select TapFly, switch to Direction Mode, then follow the prompts.
In-Flight（GPS）
D
H 9.6
In-Flight（GPS）
1 m
12 61
P-GPS
%
2.4G
09:29
1080P/30
9.6 S 1.1
12 61
TapFly %
2.4G
09:29
1080P/30
Spark User Manual
©
2017 DJI All Rights Reserved.
21