dji Spark User Manual page 18

Spark User Manual
Using ActiveTrack
Ensure the Intelligent Flight Battery is fully charged and the aircraft is in P Mode. Follow the steps below
to use ActiveTrack:
1. Take off and hover at least 4.5 ft (1.5 m) above ground.
2. In DJI GO 4, tap
3. Tap on the subject you want to track then tap to confirm your selection. If the subject is not
automatically recognized, drag a box around it. The box will turn green when tracking is in progress. If
the box turns red, the object could not be identified and you should try again.
4. The aircraft will automatically avoid obstacles in its flight path. If the aircraft loses track of the subject,
because it is moving too fast or is obscured, re-select the subject to resume tracking.
18
©
2017 DJI All Rights Reserved.
to bring up the flight modes and select ActiveTrack.
In-Flight（GPS）
In-Flight（GPS）
1.5 m
P-GPS 12
09:29
H 9.6 D 9.6 S 1.1
12
ActiveTrack
09:29
GO
61
%
2.4G
1080P/30
61
%
2.4G
1080P/30