Flight Recorder; Quicktransfer - dji MAVI 3 CLASSIC User Manual

DJI Mavic 3 Classic User Manual

Flight Recorder

Flight data including flight telemetry, aircraft status information, and other parameters are
automatically saved to the internal data recorder of the aircraft. The data can be accessed using
DJI Assistant 2 (Consumer Drones Series).

QuickTransfer

Mavic 3 Classic can connect directly to mobile devices via Wi-Fi, enabling users to download
photos and videos from the aircraft to the mobile device through DJI Fly without the need of
the RC-N1 remote controller. Users can enjoy faster and more convenient downloads with a
transmission rate of up to 80 MB/s.
Usage
Method 1: mobile device is not connected to the remote controller
1. Power on the aircraft and wait until the self-diagnostic tests of the aircraft are complete.
2. Make sure Bluetooth and Wi-Fi is enabled on the mobile device. Launch DJI Fly and a prompt
will automatically appear to connect to the aircraft.
3. Tap Connect. Once successfully connected, the files on the aircraft can be accessed and
downloaded at a high speed.
Method 2: mobile device is connected to the remote controller
1. Make sure that the aircraft is connected to the mobile device via the remote controller and
the motors have not started.
2. Enable Bluetooth and Wi-Fi on the mobile device.
3. Launch DJI Fly, enter playback, and tap in the upper right corner to access the files on the
aircraft to download at high speed.
• The maximum download speed can only be achieved in countries and regions where
the 5.8 GHz frequency is permitted by laws and regulations, when using devices that
support 5.8 GHz frequency band and Wi-Fi 6 connection, with the footage using the
internal storage of aircraft, and in an environment without interference or obstruction.
If 5.8 GHz is not allowed by local regulations (such as in Japan), the mobile device of
the user will not support the 5.8 GHz frequency band or the environment will have
severe interference. Under these circumstances, QuickTransfer will use the 2.4 GHz
frequency band and its maximum download rate will reduce to 10 MB/s.
• Make sure that Bluetooth, Wi-Fi, and location services are enabled on the mobile
device before using QuickTransfer.
• When using QuickTransfer, it is not necessary to enter the Wi-Fi password on the
settings page of the mobile device in order to connect. Launch DJI Fly and a prompt
will appear to connect the aircraft.
• Use QuickTransfer in an unobstructed environment with no interference and stay
away from sources of interference such as wireless routers, Bluetooth speakers, or
headphones.
38 ©
2022 DJI All Rights Reserved.