Flight Recorder; Attaching And Detaching The Propellers; Dji Intelligent Flight Battery - dji Inspire 2 Series User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. You can connect the
aircraft to a computer via the USB port and export this data via DJI Assistant 2. This includes data
for the sensors, navigation system, devices, aircraft control, no-fly zones, and vision system images.
Note that all data is encoded and only stored on your DJI device. Data does not upload to a DJI
server automatically, nor is it shared with DJI in any other way.

Attaching and Detaching the Propellers

Attaching the Propellers
Refer to "Attaching Propellers" for details.
Detaching the Propellers
Press down the spring pad and rotate the propeller lock to remover the propeller.
Be aware of the sharp edges of the propellers. Handle with care.
Use only the DJI approved propellers. Do not mix propeller types.
Check that the propellers and motors are installed correctly and firmly before every flight.
Ensure that all propellers are in good condition before each flight. DO NOT use aged,
chipped, or broken propellers.
To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are
spinning.
ONLY use original DJI propellers for a better and safer flight experience.

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 4280mAh, voltage of 22.8V, and smart charge-
discharge functionality. It can only be charged with an appropriate DJI approved charger.
DJI Intelligent Flight Battery Functions
1. Battery Level Display: LEDs display the current battery level.
2. Auto-discharging Function: The battery automatically discharges to below 70% of total power
when it is idle (press the power button to check battery level will cause battery to exit idle state)
for more than 10 days to prevent swelling. It takes around 3 days to discharge the battery to
65%.It is normal to feel moderate heat emitting from the battery during the discharge process.
Discharge thresholds can be set in the DJI GO 4 app.
3. Balanced Function: Automatically balances the voltage of each battery cell when charging.
4. Over charge Protection: Charging automatically stops when the battery is fully charged.
5. Temperature Protection: The battery will only charge when the temperature is between 5 °C (41°F)
and 45°C (113°F).
6. Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected.
7. Over Discharge Protection: Over-discharging can seriously damage the battery. Current output will
be cut off when the battery cell is discharged to 2.8V and not in flight mode. To extend flight times,
over-charging protection is disabled as batteries discharge during flight. In this instance, a battery
voltage below 2V, may cause a safety hazard such as a fire when charged. To prevent this, the
battery will not be able to charge if the voltage of a single battery cell is below 2V. Avoid using any
INSPIRE 2 SERIES User Manual
©
2018 DJI All Rights Reserved.
29